Foundation Pier Work

Today, a growing number of houses are being constructed on unsteady soils, such as the ones that you learned about in previous chapters. In between hydro-compactable and extensive soils and subsidence, structures are pressed and pulled, creating motion. Each year, thousands of property owners are confronted with repairing and evaluating foundation problems. Thankfully, this implies that there are reputable, engineered solutions available.

Exactly what is offered and is it the ideal option for your structural issues?

Press Piers are essentially long steel shafts that are hydraulically owned into the ground through the unsteady surface area soils till they reach bed-rock or other load bearing strata. Service technicians can inform that the piers have actually reached bedrock by measuring the hydraulic pressure required to drive the piers into the ground until they fulfill an engineer defined depth. The house’s weight is then transferred off of the unstable soil and onto the piers through pier brackets connected to the footing of the house.

Helical Piers are likewise driven into the ground using hydraulics, however they are developed into the ground like a huge screw. They are huge screws that literally hold up a house through resistance power. The home’s weight is then moved onto the piers using the very same resilient steel brackets.

Considering that the root of structural issues is the soil, the first 2 services deal with taking the structure’s weight off of unstable soils and positioning it on bedrock or other stable soil-these services are called push piers and helical piers.

Signs that You Need a Piering System:

You have an area of your structure wall that is experiencing vertical movement, such as sinking.

Your chimney is not flush with your home.

Your soil conditions can be categorized as expansive, subsiding, hydro-compactable, or active.

How Piers are set up in 6 Basic Steps:

Step 6: After an engineer’s approval, the soil around the home is changed and landscaping can be returned to its initial location.

Step 4: Rugged steel piers are hydraulically owned to solid bedrock or equal-load bearing strata.

Step 5: The weight of the home, anchored to the steel brackets, is carefully moved from unstable soil to rock-solid piers.

Step 2: Soil is eliminated till the footing of the concrete structure is exposed.

Step 3: Foundation pier anchoring brackets of heavy, industrial-strength steel are connected to the home’s footings.

Step 1: Outside, sod and landscaping around the house is removed and set aside.

There are numerous other alternatives that have actually been used throughout various eras to solve structure problems. The earliest method is to jack up your home and replace the structure and the most recent technique is to make use of piering systems either on the entire border of the house, or just one portion. Here’s a breakdown of the other approaches that individuals have actually used to deal with foundation concerns from earliest to most recent:

Change the Foundation:

Damages yard and takes a number of weeks to finish

No warranty against the same issue reoccuring (expect exact same outcome

Footings are still in the Active Zone

EXTREMELY EXPENSIVE-$ 50,000 PLUS

Concrete Underpinning/Spread Footings:

Can take weeks/months

Added weight of the concrete can make problem worse

Structure can not be raised

Footings are still in the Active Zone

Concrete Piers:

Concrete cylinders can break during setup and CAN NOT be obtained due to depths

Cylinders produce too much skin friction to obtain through the Active Zone

May require additional shims in the future

Even if shimming is included in the service warranty, the damage from re-settlement and re-excavation is not covered

Square Shaft Helical Piers:

Originally created to supply resistance to person wires on electrical towers during high winds.

Not developed to hold up weight through soils

Square shafts experience flexing and folding when a structure’s weight resting on it.

Concrete Piers with Cable Reinforcement:

Engineered for particular soil conditions that are not present in Colorado.

Cylinders develop excessive skin friction to get through the Active Zone

Cabling in center of pier stretches in time, allowing for minute after piers in place.

Additional cabling on outside of cylinders can increase skin friction of cylinder.

Lastly, piering systems:

Push Piers WILL:

Enable the possibility of closing or shrinking existing cracks in brick, stucco, sheetrock, or other interior or exterior finishes.

Enable the possibility of raising a structure to a flatter, more level condition.

Helical Piers MAY:.

Offer lateral (horizontal) restraint to a bowing foundation wall (unless specifically installed in “tie-back” mode).

Guaranty that completely flat or level final conditions will be achieved.

Today, more and more houses are being constructed on unsteady soils, such as the ones that you learned about in previous chapters. Between hydro-compactable and extensive soils and subsidence, foundations are pushed and pulled, producing motion. Press Piers are essentially long steel shafts that are hydraulically driven into the ground through the unsteady surface area soils till they reach bed-rock or other load bearing strata. The home’s weight is then moved off of the unstable soil and onto the piers through pier brackets attached to the footing of the home.

Offer a life time guarantee, transferable for the very first 25 years that vertical movement in the piered areas will not occur.

Improve the water tightness or lower the moisture level in a basement.

Allow for the probability of raising a structure to a flatter, more level condition.

Provide a life time warranty, transferable for the first 25 years, that vertical motion in the piered areas will not occur.

Permit setup as a pre-construction (or new building) bearing system in bad soils.

Perform its job in a lot of soil conditions for a developed life in excess of 100 years.

Push Piers WILL NOT:.

Helical Piers WILL NOT:.

Allow for a horizontal installation as a “tie-back” system to offer resistance against land creep in hillside locations.

Allow for the possibility of closing or shrinking existing cracks in brick, stucco, sheetrock, or other interior or exterior surfaces.

The earliest technique is to jack up the house and replace the structure and the newest technique is to make use of piering systems either on the entire boundary of the house, or simply one portion.

Provide lateral (horizontal) restraint to a bowing structure wall.

Allow for the possibility of low effect interior installations (typically, with far less civilian casualties than the outside approach).

Guaranty that perfectly flat or level last conditions will be attained.

Permit the re-alignment of sticking doors or windows, and the straightening of leaning chimneys.

With a couple of uncommon exceptions, need outside excavation, with destruction to surrounding landscaping or paving.

Enable setup on relatively older, weaker, or lighter structure types.

Enhance the water tightness or lower the moisture level in a basement.

Enable the deepest penetration of any steel pier type.

Push Piers MAY:.

Helical Piers WILL:.

Perform its task in most soil conditions for a created life in excess of 100 years.

Permit the re-alignment of sticking doors or windows, and the straightening of leaning chimneys.